/half-year-clearance-jun-2017-huge-saving-up-to-30-off-82
To Top

Gelee Base Coat 15ml

  • GGB001
  • Quantity: 33
0.0
  • 0
25.00
Quantity
33 In Stock Online

Details

Gelee Powder Gel Nail System Set

Contain:

  •  1 top coat 0.5oz
  •  1 base coat 0.5oz
  •  1 primer 0.5 oz
  •  1 clear gel powder 2oz
  •  1 remover 8oz
  •  1 gel cleanser 8oz
Instructions:

            1. Nail Preparations:

a. Completely remove polish if any.

b. Push back cuticles.

c. Cleanse both you and your clients hands with Gelée™ Cleanser.

2. Prepare natural nails for tip application.

a. Use a 180 grit zebra file to etch the natural nail plate for the tip to adhere properly.

b. Apply tips using rock-on method.

c. Cut to desired length.

d. Rough up and blend with a 100/180 grit zebra file.

3. Using a nylon brush remove excess dust. Spray and wipe nails with Gelée™ Gel Cleanser using lint-free wipes.

     

4. Apply small amount of Gelée™ Primer to nail and let dry to a chalky white.

     

5. Gelée Base Coat (blue bottle) & Gel Powder® Application:

a. Apply a thin layer of Base Coat over ¾ of nail as if applying nail polish on all 5 fingers. Sprinkle Gel Powder® over entire nail while rocking client’s finger side to side, to ensure complete coverage. Focusing on side walls. Gently tap fingers to remove excess Gel Powder®.

b. Cure under LED lamp for 30 seconds (36 watt UV lam 1min). Repeat step (5a) for second layer.

c. Stress point coverage (recommend build one finger at a time): Apply thin layer of Base Coat over entire nail starting one millimeter away from cuticle down to the free-edge, add Base Coat in droplet form to the center of the nail bed. Wait until gel self level to desired depth, then sprinkle Gel Powder® using the same technique as in step (5a).

d. Cure under LED lamp for 30 seconds (36 watt UV lamp 1 min). Repeat step (5c) on all fingers.

6. Shaping:

a. Use a 100/180 Zebra file to shape and bevel nails to desired shape. Clean and taper around the cuticle and sidewalls.

b. Buff nail for an even smooth surface using a LeChat white block buffer.

c. Brush off dust using a nylon brush.

d. Spray and wipe nails using Gelée™ Gel Cleanser.

7. Gelée™ Top Coat (white bottle) Application:

a. Brush on a thin layer of Top Coat, make certain to cover entire nail and cap free edge for a complete seal. Prevent thickness by brushing few strokes from cuticle straight down to free edge before placing nail under LED/UV Lamp.

b. Cure under LED lamp for 30 seconds. (36 watt UV lamp 1 min).

c. Remove all gel residue from nails by spraying and wiping nails with Gelée Gel Cleanser.

d. Leave nails looking natural or finish with gel polish or nail lacquer.


As Seen On Photo

Product Reviews

Recommended for you